Linux version 2.6.14_Centrino_intelFB (tim@frankenheim) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 PREEMPT Mon Oct 31 20:08:55 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data) BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 495MB LOWMEM available. On node 0 totalpages: 126960 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 122864 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 OID_00 ) @ 0x000e6010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1effa5b0 ACPI: FADT (v001 COMPAL DCL51_00 0x00000100 _CSI 0x00010101) @ 0x1efffb00 ACPI: BOOT (v001 INSYDE BOOT_000 0x00000001 _CSI 0x00010101) @ 0x1efffb90 ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 _CSI 0x00010101) @ 0x1efffbc0 ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x1effa5f0 ACPI: DSDT (v001 ACER TM290 0x00000006 MSFT 0x0100000e) @ 0x00000000 Allocating PCI resources starting at 20000000 (gap: 1f000000:e0b80000) Built 1 zonelists Kernel command line: root=/dev/hda5 ro vga=791 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (013e2000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1399.014 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 499220k/507840k available (2560k kernel code, 8072k reserved, 759k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2801.13 BogoMIPS (lpj=5602278) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0c20) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe9824, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1300-133f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs *10) ACPI: Embedded Controller [EC0] (gpe 28) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 2, cardbus bridge: 0000:01:04.0 IO window: 0000c400-0000c4ff IO window: 0000c800-0000c8ff PREFETCH window: a0000000-a1ffffff MEM window: e2000000-e3ffffff PCI: Bridge: 0000:00:1e.0 IO window: c000-dfff MEM window: e0000000-efffffff PREFETCH window: a0000000-afffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 Simple Boot Flag at 0x37 set to 0x80 Machine check exception polling timer started. Initializing Cryptographic API ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Detected 16252K stolen memory. agpgart: AGP aperture is 128M @ 0xb0000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized i830 1.3.2 20021108 on minor 0: PCI: Enabling device 0000:00:02.1 (0000 -> 0002) [drm] Initialized i830 1.3.2 20021108 on minor 1: intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets intelfb: Version 0.9.2 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 16252kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Initial video mode is 1024x768-16@60. intelfb: Changing the video mode is not supported. Console: switching to colour frame buffer device 128x48 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:1f.6 disabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK6021GAS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usbmon: debugfs is not available usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09 2005 UTC). ALSA device list: No soundcards found. oprofile: using timer interrupt. NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered ip_conntrack version 2.3 (3967 buckets, 31736 max) - 216 bytes per conntrack input: AT Translated Set 2 keyboard on isa0060/serio0 ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: ELAN USB1 USB2 USB3 EUSB MODM ACPI: (supports S0 S1 S3 S4 S5) EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 172k freed kjournald starting. Commit interval 5 seconds input: PS/2 Mouse on isa0060/serio4 input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4 Adding 1028120k swap on /dev/hda8. Priority:-1 extents:1 across:1028120k EXT3 FS on hda5, internal journal NET: Registered protocol family 23 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 input: USB HID v1.10 Mouse [1241:1166] on usb-0000:00:1d.1-1 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf0080000 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb 2-1: USB disconnect, address 2 usb 2-1: new low speed USB device using uhci_hcd and address 3 input: USB HID v1.10 Mouse [1241:1166] on usb-0000:00:1d.1-1 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55487 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 PCI: Via IRQ fixup for 0000:01:00.0, from 11 to 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0001800-e0001fff] Max Packet=[2048] 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xc000, 00:02:3f:13:d5:13, IRQ 10 eth0: Identified 8139 chip type 'RTL-8101' ieee80211_crypt: registered algorithm 'NULL' ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.1.0 ipw2100: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection eth1: Radio is disabled by RF switch. ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 Yenta: CardBus bridge found at 0000:01:04.0 [1025:003d] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46 Yenta: ISA IRQ mask 0x08c8, PCI irq 10 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff cs: IO port probe 0xc000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f42440064c2] parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0x100-0x4ff: excluding 0x3c0-0x3df 0x4d0-0x4d7 cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. lp0: using parport0 (interrupt-driven). NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: no IPv6 routers present